Designing a Solenoid for Unaccounted-for Corner Conditions
TLX Technologies designed a D-frame solenoid to replace an existing solution that did not meet space constraints and performance specs.
Custom Solenoids and Valves for Automotive Applications
TLX designs and develops custom solenoids and valves for automotive applications, expertly tailored to your exact needs.
Proportional Canister Purge Valve
A pulse-width-modulated, normally closed, two-port proportional solenoid valve.
3-Way Switching Valve
A thermal management control with three ports that brings together critical performance characteristics and flexibility to suit multiple mobility platforms.
4-Way Switching Valve
A thermal management control valve with four ports that brings together critical performance characteristics and flexibility to suit multiple mobility platforms.
Discrete Proportional Valve System
Uses only a short pulse of power to actuate and does not require constant power to maintain state.
Peak and Hold Control Module
The peak and hold control module allows any-size solenoid to operate at a higher force without overheating the coil.
High-Flow Discrete Proportional Valve
Designed to support applications with high flow rates at pressures up to 60 psi, with customizable flow characteristics.
Digital High-Speed Control Valve
A digital valve that was designed to control outlet flow for high-pressure gas vessels.
Proportional Pneumatic Control Valve
Pulse-width-modulated flow control that was configured for specific pressure/vacuum ranges.
Coolant Control Valve
A continuous-duty, normally closed valve with a maximum flow rate of 0.5 L/s.
Solenoid Vent Valve
A normally closed, three-way valve with an integrated check valve.
D-Frame Solenoid
A continuous duty solenoid that delivers a high pull force and a long stroke relative to its package size.
Three-Way Proportional Pressure Reducing-Relieving Valve
This proportional solenoid valve is a direct-acting, normally open, continuously variable pressure relief valve.
Proportional Solenoid Actuator
This proportional solenoid actuator (used to power proportional hydraulic valves in off-highway applications) is direct-acting and continuously variable.
Proportional Pressure Reducing Relieving Valve
This continuously variable pressure reducing relieving valve can be designed to operate over various pressure ranges to optimize controllability.
Three-Position Push/Pull Solenoid
This continuous duty solenoid’s armature had three positions: centered, fully extended, or fully retracted.
Miniature Latching Solenoid
Miniature solenoids provide options for applications with limited space or size constraints.
Pressure Release Solenoid Valve
A high-temperature on/off solenoid valve that reduces pressure inside a closed cavity.
Residual Magnetism Latching Solenoid
A latching solenoid that used residual magnetism instead of a permanent magnet.
Three-Position Latching Solenoid
This solenoid’s armature had three positions: fully extended, centered, or fully retracted.
Latching Solenoid
Uses only a short power pulse to actuate and maintains position without constant power.
Miniature Manual Reset Latching Solenoid
A small latching solenoid with a fast response time that had to be manually latched.
Additional Resources
A Valve for Off-Highway Vehicle Operator Comfort
TLX Technologies developed a continuous duty, three-way valve for the driver’s seat air suspension system.
A Digital Valve for Safer Airbag Inflation
An ultrafast valve that could provide variable flow control during an inflation event.
Stepped-Function Flow Control for Liquid Cooling
Low power consumption and predictable, repeatable flow rates are combined in one valve system.
Are you designing the technology of tomorrow?
Start your conversation with a TLX engineer today.
